Plate Heat Exchanger
What is a Plated Heat Exchanger?
In the result of R&D studies about cost and efficiency, many heat exchangers have been developed as an alternative to conventional piped type head exchangers.
Plated type head exchangers have gained a wide application area among them and ended the usage of piped types. In early times, plated heat exchangers which were generally used in food industry and milk pasteurization are, widely used in various applications in the present.
TANPERA Plated Heat Exchangers provide the best technology, efficiency and usage efficiency in a wide range of application areas such as special construction Technologies, automotive industry and general industrial usages, food processing phases, special applications in chemical and pharmatecual industry.
It's Structure and Working Principle
A plated heat exchanger is composed of special pressure channel metal plates which have liquid inlets/outlets on them and which are aligned in a row to establish a heat transmission surface. Rubber seals between these plates compose the flow way in which the primary and secondary circuit liquids which transmits head from one to the other shall circulate and prevents the liquids to mix and leak. Thus, while liquids move in the heat exchanger through skipping one plate, heat transmission is composed through hot liquid to cold liquid over the plate between them. The package composed of heat transmission plates and the seal between them is clamped to a defined total thickness with tie-rods between two hold downs one of which them moving and the other is fixed as a result the sealing of the heat exchanger is maintained.
Technical Data Required for Specification
Heat amount to be conducted .............................. kcal / h
Primary Circuit / Secondary Circuit
Fluid type .................................................................. water
Fluid flow ................................................................... m³ / h
Inlet temperature ..................................................... °C
Outlet temperature .................................................. °C
Maximum allowable pressure drop .................... mSS
Maximum operating pressure ............................... bar
Maximum operating temperature.......................... °C
8 Reasons to Choose Tanpera Heat Changers;
1-Ready for All Missions...!
There are plates in different length, channel depth and channel angle in our product range. Thus, heat exchanger can be designed to suit for different operating conditions and while transmitting the heat as required, it utilizes the pressure drop as well. This makes optimum pricing possible.
2- High Quality at Reasonable Prices…!
TANPERA plated head exchanger requires less heat transmission surface area when compared to piped heat exchanger. Because, high turbulent flow provided by special channel plate structure and thin heat transmission plates, the heat transmission in unit area is much more than piped heat exchanger. Thanks to this specification, although the plates are produced of expensive material which is corrosion resistive, they cost less than carbon steel piped heat exchangers.
3- Long Life…!
The corrosion resistive materials used in their structure, high turbulent flow and the smoothness of plate surfaces ensure the minimization of contamination, calcification, corrosion and erosion. The deep grooves ensures the seal to be supported better, the top part's taper seal structure ensures compression force to reach the peak value on seal axis. These kinds of seals provide more sealing endurance and more resistance to strokes in respect to old type plan seals. All these, increases the life of seal and ensures problem free operation.
4- 1 C° temperature Difference? Very easy…!
With full reverse flow maintained by it, it becomes an ideal solution even in applications where liquid temperatures are very close.
5- Small- Light but Powerful…!
The compact structure as a result of the small area of heat transmission surface maintains its operation weight, mounting weight to be much less than piped heat exchangers which are
designed for the same purpose. Thus it can be placed in limited areas and also shipping and mounting expenses are less.
6- Perfect Reflexes…!
TANPERA plated heat exchangers provide users the opportunity of a better control on systems through the short response time obtained low liquid volume.
7- Intelligent Seal…!
The risk of liquids mixing with each other due to worn seals is terminated through intelligent seal system. So that, the seal which limits a liquid, does not have the other liquid on the other
side. The other side of the seal is open to the external environment by virtue of special channels. This facilitates the detection of worn parts of the seal from exterior because, in
case of seal damage the leaked liquid does not mix the other liquid but leaks out of the device though channels.
8- Operator Friendly…!
The device is easily dismantled and all transmission surfaces are easy to reach. This enables plate addition in case of cleaning a unit, replacing old or damaged plates and seals and in case of
capacity increase. The seals are mounted with special lock systems without affixing to plates. Special plate holding system decreases the risk of wrong plate arrangement even for inexperienced personnel. In this system, the beveled end where the plates are hold. These specifications decrease the time
required for maintenance and seal replacement tasks, decrease their cost and increase the service life of the product.
Where to Use:
-
Independent and Mass Housing
-
Premises and Social facilities
-
Health, Education and Sports facilities
-
Culture-Art Structures
-
Tourism and Rest Areas
-
Offices, business offices and business malls
-
Administrative buildings and facilities
-
Metal production and machining facilities
-
Chemical and pharmatecuals facilities and Petrochemistry
-
facilities
-
Paper and Plastics Production Facilities
-
Food and Milk Production Facilities
The extensive plate program of TANPERA Plated Heat
Exchangers which can provide the best solution for all kinds of tasks, distinguishes with its safe design and visible quality in its structure. This quality is proved with long service life, economical and problem free operation, low repair and maintenance costs.
With TANPERA quality and assurance, besides the
conventional sealed type heat exchangers, plated heat-exchangers which are developed for special purposes and which have a specialized design.
TANPERA Plated Heat Exchangers are provided to our
customers together with technical service and spare part guaranty as well as fast and safe before-sales and after-sales service guarantee.
Available Documents
| ORW Series...Plate Heat Exchangers Catalog |